TP-Link TL-SF1006P User Manual

Connection
© 2020 TP-Link 7106508699 REV1.0.0
Installation Guide
6-Port 10/100Mbps Desktop Switch with 4-Port PoE+
LED Explanation
Power
On: Power on
O: Power o
Note: 1. PoE ports can also connect to non-PoE devices, but only transmit data.
2. TL-SF1006P can supply up to 30 W for each PoE port and 67 W for all PoE ports.
Power
PoE MAX
PoE Max
On: 60 W≤Total power supply < 67 W
Flashing: Total power supply ≥ 67 W
O: Total power supply < 60 W
DC Power Adapter
AC Power Cord
Router
LAN Port
WAN Port
Internet
Ethernet Ports (1-6)
PoE Ports (1-4)
IP Camera IP Phone
PoE Devices
AP
Link/Act and PoE Status
On: Link present but no activity
Flashing: Transmitting/receiving data
O: No link
On: Providing PoE power
Flashing: Current-overload/Short-circuit
O: Not providing PoE power
O: Port 1–4 run at 10/100 Mbps and support PoE power supply up to 100 m
away.
On: Port 1–4 run at 10 Mbps and support PoE power supply up to 250 m away.
Extend (Port 1–4)
O: All the ports transmit data in the same priority.
On: Port 1 and 2 transmit data in a higher priority than other ports. When
congestion occurs, packets which are transmitted by the ports with higher
priority occupy the whole bandwidth.
Priority (Port 1–2)
Switch Explanation
Network Video Recorder

TP-Link TL-SF1006P Specifications

General

Heat dissipation	252.34 BTU/h
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Certification	FCC, CE, RoHS
Product color	Black
Rack mounting	No
LED indicators	Yes
Housing material	Metal
Networking standards	IEEE 802.3af, IEEE 802.3at
Cable types supported	Cat3, Cat4, Cat5, Cat5e
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 100BASE-T
Power source	DC/PoE
Input current	1.31 A
AC input voltage	220 V
DC input voltage	53.5 V
AC input frequency	50 Hz
Power consumption (max)	74 W
Jumbo frames	2000
Forwarding rate	0.8928 Mpps
MAC address table	2000 entries
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports type	Fast Ethernet (10/100)
Basic switching RJ-45 Ethernet ports quantity	6
Total Power over Ethernet (PoE) budget	67 W
Power over Ethernet plus (PoE+) ports quantity	4
Switch type	Unmanaged
Harmonized System (HS) code	85176990
Package type	Box
Package depth	196 mm
Package width	131 mm
Package height	121 mm
Package weight	870 g
Sustainability certificates	CE, Federal Communications Commission (FCC), RoHS

Weight and Dimensions

Depth	101 mm
Width	158 mm
Height	25 mm

Summary

LED Indicators Explained

Power and POE MAX LED Status

Explains the states of the Power and POE MAX LEDs on the switch.

Link/Act and PoE Port Status

Describes the Link/Act and PoE status indicators for the switch ports.

Switch Functionality Explained

Port Priority Mode

Details the priority function for ports 1 and 2 affecting data transmission.

Extend Mode for Ports

Explains the extend mode for ports 1-4, impacting speed and transmission range.

Frequently Asked Questions

Power LED Troubleshooting

Provides troubleshooting steps if the Power LED is not illuminated.

Link/Act LED Troubleshooting

Offers solutions for when the Link/Act LED does not light up.

PoE Power Supply Issues

Explains reasons for PoE ports not supplying power and priority logic.

Technical Specifications

General Specifications

Lists general technical specifications including standards, capacity, and power input.

Environmental and Physical Specs

Details operating and storage conditions, humidity, and physical dimensions.

Important Information and Safety

PoE Disclaimer

States limitations on PoE speed in extend mode and budget calculations.

Safety Precautions

Provides crucial safety precautions for device operation and maintenance.

Mounting Requirements

Screw Specifications for Wall Mount

Details the specific screw types and dimensions required for wall mounting the device.

Product Label Symbol Explanations