Need help?Do you have a question about the TP-Link TL-SF1008P and is the answer not in the manual?
General| Heat dissipation | 248.93 BTU/h |
|---|---|
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| User guide | Yes |
| Package type | Box |
| Package depth | 280 mm |
| Package width | 223 mm |
| Package height | 68 mm |
| Package weight | 970 g |
| 10G support | No |
| Networking standards | IEEE 802.3, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x |
| Cable types supported | Cat3, Cat4, Cat5, Cat5e |
| Copper ethernet cabling technology | 10GBASE-T, 100BASE-TX |
| Forwarding rate | 1.1904 Mpps |
| MAC address table | 2000 entries |
| Total Power over Ethernet (PoE) budget | 57 W |
| Power over Ethernet plus (PoE+) ports quantity | 8 |
| Switch type | Unmanaged |
| Product color | Black |
| Housing material | Metal |
| Power connector | DC-in jack |
| Installed SFP modules quantity | 0 |
| Basic switching RJ-45 Ethernet ports type | Fast Ethernet (10/100) |
| Power source | DC/PoE |
| Input current | 1.31 A |
| AC input voltage | 220 V |
| DC input voltage | 53.5 V |
| AC input frequency | 50 Hz |
| Power consumption (max) | 66 W |
| Harmonized System (HS) code | 85176990 |
| IPv4 & IPv6 features | IPv6 portal |
| Sustainability certificates | CE, Federal Communications Commission (FCC), RoHS |
Weight and Dimensions| Depth | 98 mm |
|---|---|
| Width | 171 mm |
| Height | 27 mm |
Details compliance with FCC rules for Class A digital devices and interference guidelines.
Warns about potential radio interference in domestic environments for this Class A product.
Advises against using the product near water or during electrical storms due to shock risk.
Introduces the TL-SF1008P switch, its capabilities, and PoE features.
Defines the terminology used for the switch in the user guide.
Lists the key technical specifications and functionalities of the switch.
Provides step-by-step instructions for placing and securing the switch on a flat surface.
Explains the procedure for powering on the switch and what to expect from the LED indicators.
Details the LEDs and ports located on the front of the TL-SF1008P switch.
Describes the power input and Ethernet ports on the rear of the TL-SF1008P switch.
To Next Page
