Need help?Do you have a question about the TP-Link TL-SF1024 and is the answer not in the manual?
General| Number of Ports | 24 |
|---|---|
| Port Type | 10/100Mbps RJ45 |
| Switching Capacity | 4.8Gbps |
| MAC Address Table | 8K |
| Rack Mountable | Yes |
| Standards and Protocols | IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
| Auto-Negotiation | Yes |
| Auto MDI/MDIX | Yes |
| Forwarding Rate | 3.57Mpps |
| Jumbo Frame | No |
| Power Supply | 100-240VAC, 50/60Hz |
| Mounting | Rack Mountable |
| Packet Forwarding Rate | 3.6Mpps |
| Dimensions | 440 x 180 x 44 mm |
Provides a general description of the 16/24/48-port Fast Ethernet Switch features.
Lists the main technical features and standards supported by the switch.
Describes the front panel of the switch, including ports and LED indicators.
Describes the rear panel of the switch, including power socket and grounding terminal.
Outlines essential safety and location requirements before installing the switch.
Step-by-step guide for placing the switch on a flat surface.
Instructions for mounting the switch into a standard 19-inch rack.
Explains the methods for grounding the switch for protection.
Describes the process of powering on the switch and expected LED behavior.
To Next Page
