Need help?Do you have a question about the TP-Link TL-SF1016D and is the answer not in the manual?
General| 10G support | No |
|---|---|
| Full duplex | Yes |
| Networking standards | IEEE 802.3u, IEEE 802.3x |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Copper ethernet cabling technology | 100BASE-TX, 10BASE-T |
| MAC address table | 2000 entries |
| Switch type | Unmanaged |
| Power connector | DC-in jack |
| Installed SFP modules quantity | 0 |
| Basic switching RJ-45 Ethernet ports type | Fast Ethernet (10/100) |
| Basic switching RJ-45 Ethernet ports quantity | 16 |
| Product color | Black |
| Heat dissipation | 11.01 BTU/h |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Power source | DC |
| Input current | 0.6 A |
| DC input voltage | 9 V |
| Power consumption (max) | 3.23 W |
| Package type | Box |
| Package depth | 285 mm |
| Package width | 223 mm |
| Package height | 68 mm |
| Package weight | 590 g |
| Minimum system requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista, Windows 7, MAC OS, NetWare, UNIX, Linux |
| Sustainability certificates | CE, Federal Communications Commission (FCC), RoHS |
Weight and Dimensions| Depth | 142 mm |
|---|---|
| Width | 200 mm |
| Height | 40 mm |
Device compliance with FCC Rules part 15 for operation and interference.
Product is Class B, may cause radio interference in domestic environments.
To Next Page
