TP-Link TL-SF1016D - LED Indicators; Copyright and Trademarks

3
The Switch's LEDs are located on the front panel:
LED
Status
Indication
Power
On
The switch is powered on.
Off
No Power Source.
*Please check if the power cord
is connected to the Switch
properly, and make sure the
power is ON.
Ethernet
LED
On
The corresponding ethernet
port is connected to a network
device.
Flashing
Data is being transmitted or
received.
Off
No device is connected to the
corresponding port.
*Please check if the cable
connectors are firmly plugged
into the switch and the device,
and verify that the connected
device is turned on and working
well.
COPYRIGHT & TRADEMARKS
is a registered trademark of TP-LINK
TECHNOLOGIES CO., LTD. Other brands and product
names are trademarks or registered trademarks of their
respective holders.
Copyright © 2014 TP-LINK TECHNOLOGIES CO., LTD.
All rights reserved.
http://www.tp-link.com
Downloaded from ManualsNet.com search engine