Connection
© 2021 TP-Link 7106509224 REV4.0.0
Installation Guide
5-Port 10/100Mbps Desktop PoE/PoE+ Switch
LED Explanation
Power
On: Power on
O: Power o
Note: 1. PoE ports can also connect to non-PoE devices, but only transmit data.
2. TL-SF1005LP can supply up to 15.4 W for each PoE port and 41 W for all PoE
ports.
3. TL-SF1005P can supply up to 30 W for each PoE port and 67 W for all PoE ports.
Power
PoE MAX
PoE Max
TL-SF1005LP
On: 34 W≤Total power supply < 41 W
Flashing: Total power supply ≥ 41 W
O: Total power supply < 34 W
TL-SF1005P
On: 60 W≤Total power supply < 67 W
Flashing: Total power supply ≥ 67 W
O: Total power supply < 60 W
DC Power Adapter
AC Power Cord
Router
LAN Port
WAN Port
Internet
Ethernet Ports (1-5)
PoE Ports (1-4)
IP Camera AP IP Phone
PoE Devices
Link/Act and PoE Status
On: Link present but no
activity
Flashing: Transmitting/
receiving data
O: No link
On: Providing PoE power
Flashing: Current-overload/
Short-circuit
O: Not providing PoE power
Note: For simplicity, we will take TL-SF1005P for example throughout the Guide.
O: Port 1–4 run at 10/100 Mbps and support PoE power supply up to 100 m
away.
On: Port 1–4 run at 10 Mbps and support PoE power supply up to 250 m away.
Extend (Port 1–4)
O: All the ports transmit data in the same priority.
On: Port 1 and 2 transmit data in a higher priority than other ports. When
congestion occurs, packets which are transmitted by the ports with higher
priority occupy the whole bandwidth.
Priority (Port 1–2)
Switch Explanation
To Next Page
Need help?
General