English
3
The Switch's LEDs are located on the front panel:
LED Status Indication
On The switch is powered on. Power
Off No Power Source.
*Please check if the power cord is
connected to the Switch properly,
and make sure the power is ON.
On The corresponding ethernet port
is connected to a network device.
Flashing
Data is being transmitted or received.
Ethernet
LED
Off No device is connected to the
corresponding port.
*Please check if the cable
connectors are firmly plugged into
the switch and the device, and
verify the connected device is
turned on and working well.
COPYRIGHT & TRADEMARKS
is a registered trademark of TP-LINK
TECHNOLOGIES CO., LTD. Other brands and product
names are trademarks or registered trademarks of their
respective holders.
Copyright © 2012 TP-LINK TECHNOLOGIES CO., LTD.
All rights reserved.
http://www.tp-link.com
To Next Page
Loading...
