Need help?Do you have a question about the TP-Link TL-SG2424P and is the answer not in the manual?
General| Ports | 24 |
|---|---|
| PoE Ports | 24 |
| Switching Capacity | 48 Gbps |
| Forwarding Rate | 35.7 Mpps |
| MAC Address Table | 8 K |
| Jumbo Frame | 9 KB |
| Power Input | 100-240VAC, 50/60Hz |
| Operating Humidity | 10% to 90% non-condensing |
| Storage Humidity | 5% to 90% non-condensing |
| IGMP Snooping | Yes |
| Link Aggregation | Yes |
| PoE Standards | IEEE 802.3af/at |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Standards and Protocols | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at |
| Mounting | Rack Mountable |
| VLAN | 802.1Q |
| Dimensions | 440 x 180 x 44mm (17.32 x 7.09 x 1.73in) |
Provides a general description of the switch's capabilities and design.
Highlights key features like resiliency, layer 2 switching, QoS, security, and manageability.
Explains how to access the switch's configuration utility via a web browser.
Details configuring user accounts, access levels, and security for the web interface.
Explains VLAN tagging and configuration for segmenting networks.
Covers global STP settings, timers, and BPDU comparison principles.
Details port-specific STP parameters like priority, path cost, and edge port settings.
Configures traffic classification, mapping, and priority levels (Port, 802.1P, DSCP).
Enables and configures PoE function, system power limits, and port priorities.
Performs cable tests and loopback tests for device troubleshooting.
Tests network connectivity using Ping and Tracert functions.
To Next Page
