Need help?Do you have a question about the TP-Link Jetstream TL-SG2218 and is the answer not in the manual?
General| Model | TL-SG2218 |
|---|---|
| Category | Switch |
| Switching Capacity | 36 Gbps |
| Forwarding Rate | 26.8 Mpps |
| MAC Address Table | 8K |
| Jumbo Frame | 9KB |
| Dimensions | 17.3 × 7.1 × 1.7 in (440 × 180 × 44 mm) |
| Mounting | Rack Mountable |
| Packet Buffer Memory | 4.1Mbit |
| Ports | 16 10/100/1000Mbps RJ45 Ports, 2 Gigabit SFP Slots |
| Standards and Protocols | IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1p |
| Interface | 16 10/100/1000Mbps RJ45 Ports, 2 Gigabit SFP Slots |
| Power Consumption | 12.7W (220V/50Hz) |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Operating Humidity | 10% to 90% non-condensing |
| Storage Humidity | 5% to 90% non-condensing |
Overview of TP-Link JetStream Smart Switch features, performance, and capabilities.
Outlines essential safety rules to prevent damage and injury during installation.
Step-by-step instructions for installing the device on a desktop surface.
Instructions for mounting the device in a standard 19-inch rack.
Details accessing and using the switch's management GUI.
Steps to reset the switch if login credentials are lost.
To Next Page