Need help?Do you have a question about the TP-Link JetStream TL-SG3452 and is the answer not in the manual?
General| Model | TL-SG3452 |
|---|---|
| Category | Switch |
| Switching Capacity | 104 Gbps |
| Forwarding Rate | 77.38 Mpps |
| Layer | L2+ |
| Fan Quantity | 2 |
| Power Supply | 100-240V AC, 50/60Hz |
| Mounting | Rack Mountable |
| MAC Address Table | 16K |
| Jumbo Frame | 9 KB |
| Software Defined Networking (SDN) | No |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Ports | 48x Gigabit Ethernet |
| SFP Slots | 4 SFP Slots |
| Management | Web, CLI, SNMP |
| Standards and Protocols | IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.3ad, IEEE 802.1ax |
| Operating Humidity | 10% to 90% RH, non-condensing |
| Storage Humidity | 5% to 90% RH, non-condensing |
| Operating Temperature | 0–45 °C (32–113 °F) |
Outlines important safety guidelines for installation.
Details how to connect the switch to ground using power supply or terminal.
Steps to access and configure the switch using the web browser interface.
Instructions for configuring the switch using the Command Line Interface.
Steps to recover forgotten username and password for the switch.
Solutions for problems accessing the switch's web interface.
To Next Page