Need help?Do you have a question about the TP-Link JetStream TL-SG3428 and is the answer not in the manual?
General| Model | TL-SG3428 |
|---|---|
| Switching Capacity | 56 Gbps |
| Forwarding Rate | 41.7 Mpps |
| Layer | Layer 2+ |
| MAC Address Table | 16K |
| Jumbo Frame | 9KB |
| PoE+ | No |
| Storage Temperature | -40°C to 70°C (-40°F to 158°F) |
| Operating Humidity | 10% to 90% non-condensing |
| Storage Humidity | 5% to 90% non-condensing |
| Ports | 24x 10/100/1000Mbps RJ45 ports, 4x 1G SFP slots |
| Management | Web, CLI, SNMP |
| VLAN | 802.1Q VLAN |
| QoS | Rate Limiting |
| Standards and Protocols | IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1Q, 802.1p, 802.1D, 802.1w, 802.1s, 802.3ad |
| Dimensions | 440 x 180 x 44mm (17.32 x 7.09 x 1.73in) |
| Operating Temperature | 0°C |
Details the function and status of LEDs on the TL-SX3206HPP model.
Explains the status indications for the PWR, SYS, and Port LEDs on the TL-SX3008F.
Details the status of PWR1, PWR2, SYS, FAN, and Port LEDs on the TL-SX3016F.
Describes the LED indicators for PWR, SYS, PoE Max, FAN, Speed, PoE, and ports on the TL-SG3210XHP-M2.
Explains PWR, SYS, and 10/100/1000M LEDs for TL-SG3210 and TL-SG3452X models.
Details port LEDs for TL-SG3452 and SFP LEDs for TL-SG3210.
Explains PWR, SYS, Link/Act, 1000Mbps, and Port 25-28 LEDs for the TL-SG3428.
Details PWR and SYS LEDs for the TL-SG3428X model.
Details Link/Act, 1000Mbps, and Port 25-28 LEDs for TL-SG3428X.
Explains PWR, SYS, PoE Max, FAN, Speed/PoE, and SFP LEDs for these models.
Description of the console port for switch management via CLI.
Details on 100M/1G/2.5G/5G/10Gbps RJ45 ports and their capabilities.
To Next Page