TP-Link TL-SG2210P User Manual

Connection
7106504968 REV2.0.0
For more information, please visit our website: http://www.tp-link.com
Installation Guide
8-Port Gigabit Smart PoE Switch with 2 SFP Slots
TL-SG2210P
Ethernet Ports (1-8)
Internet
Configuration
1. To access the GUI of the switch, open a browser and type the default
management address http://192.168.0.1 in the address field of the
browser, then press the Enter key.
To log in to the switch, the IP address of your PC should be set in the
same subnet as that of the switch. The IP address is 192.168.0.x (”x” is
any number from 2 to 254). Subnet Mask is 255.255.255.0. For details,
please refer to Appendix B in the User Guide on the resource CD.
Note:
2. Enter admin for both the User Name and Password in the lower case
letters. Then click the Login button or press the Enter key.
3. After a successful login, the main page will appear as follows, and you
can click the menu on the left side to configure the corresponding
functions.
For more details about how to configure the switch, see the User Guide
on the resource CD.
Note:
PC
SFP Slots
IP Camera AP IP Phone
PoE Devices
PoE ports can also connect to
non-PoE devices, but only transmit
data.
Maximum PoE power is 15.4W for
each PoE port and 53W for all PoE
ports.
Note:
1.
2.
DC Power Adapter
AC Power Cord

TP-Link TL-SG2210P Specifications

General

Switch type	Managed
Switch layer	L2
Console port	RJ-45
Fiber ports quantity	2
Fiber optic connector	SFP
Installed SFP modules quantity	0
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	8
10G support	No
Number of VLANs	4000
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Virtual LAN features	MAC address-based VLAN, Multicast VLAN, Protocol-based VLAN, Voice VLAN
Copper ethernet cabling technology	1000BASE-T, 1000BASE-TX, 10BASE-T
DHCP features	DHCP client, DHCP snooping, DHCPv6 client, DHCPv6 snooping
Security algorithms	SNMP, SSH, SSH-2
Jumbo frames	9000
Forwarding rate	14.88 Mpps
Number of queues	4
MAC address table	8000 entries
Packet buffer memory	4.1 MB
Fiber ethernet cabling technology	1000BASE-X, 100BASE-FX
Certification	CE, FCC, RoHS
Product color	Black
Rack mounting	-
LED indicators	Link, PoE, Power
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	75.3 W
Total Power over Ethernet (PoE) budget	58 W
Minimum system requirements	Microsoft® Windows® 98SE, NT, 2000, XP, Vista™ or Windows 7/8, MAC® OS, NetWare®, UNIX® or Linux.
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Package depth	315 mm
Package width	240 mm
Package height	70 mm
Package weight	1250 g
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	126 mm
Width	209 mm
Height	26 mm

Summary

Installation Guide

Connection Overview

Physical setup and port connections for power and network devices.

Initial Configuration Steps

Steps to access the switch's management interface via web browser.

LED Explanation and Indicators

LED Status Indicators

Details on the status lights for Power, System, PoE, and network activity.

Frequently Asked Questions

Troubleshooting Common Issues

Answers to common problems like power not lit or link/act not working.

Specifications and Safety Information

Environmental and Physical Specifications

Operating/storage conditions and humidity requirements for the switch.

Safety Notices and Compliance

Important safety precautions and regulatory compliance statements (FCC, CE).