05
L2 Managed Switch
Grounding Terminal
Power Socket
Figure 1-5 Rear Panel of TL-SG3210
The rear panel of TL-SG3216/TL-SG3424/TL-SG3424P is shown as the following figure.
Grounding Terminal
Power Socket
Figure 1-6 Rear Panel of TL-SG3216/TL-SG3424/TL-SG3424P
Grounding Terminal
The switch already comes with lightning protection mechanism. You can also ground
the switch through the PE (Protecting Earth) cable of AC cord or with Ground Cable.
For detailed information, please refer to Chapter 3 Lightning Protection.
Power Socket
Connect the female connector of the power cord here, and the male connector to
the AC power outlet. Please make sure the voltage of the power supply meets the
requirement of the input voltage (100-240V~ 50/60Hz).
Caution: Please use the provided power cord.
Introduction
To Next Page
Loading...
