Need help?Do you have a question about the TP-Link TL-SG3428X-UPS and is the answer not in the manual?
General| Switch Type | Managed |
|---|---|
| Ports | 28 |
| Power over Ethernet (PoE) | No |
| Switching Capacity | 128 Gbps |
| Forwarding Rate | 95.23 Mpps |
| MAC Address Table | 16K |
| Quality of Service | Yes |
| Access Control List | Yes |
| Fan Quantity | 2 |
| Power Supply | AC 100-240V, 50/60Hz |
| Uplink Ports | 4 x 10G SFP+ |
| Console Ports | 1 x RJ45 |
| Jumbo Frame | 9 KB |
| VLAN | 802.1Q VLAN |
| Security | DHCP Snooping |
| L3 Features | DHCP Relay |
| Management | Web-based GUI |
| Dimensions (W x D x H) | 440 x 44 x mm |
| Mounting | Rack Mountable |
| Standards and Protocols | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1Q |
| L2 Features | Port Mirroring, Link Aggregation, Spanning Tree Protocol |
Provides a comprehensive overview of the TP-Link JetStream L2/L2+ Managed Switch's features, performance, and capabilities.
Outlines crucial safety guidelines to prevent potential harm to personnel and damage to the device during installation.
Provides step-by-step guidance for physically installing the switch, covering both desktop and rack-mounting methods.
Guides users through the process of connecting the power cord and safely powering on the switch.
Provides instructions for managing and configuring individual switches using Graphical User Interface (GUI) or CLI.
Details centralized management of multiple devices using Omada Hardware or Software Controllers for large-scale networks.
To Next Page