Need help?Do you have a question about the TP-Link TL-SG3428X and is the answer not in the manual?
General| Switch type | Managed |
|---|---|
| Switch layer | L2+/L3 |
| Quality of Service (QoS) support | Yes |
| Stackable | - |
| Form factor | 1U |
| Product color | Black |
| Number of fans | 0 fan(s) |
| Console port | RJ-45/micro-USB |
| Power connector | AC-in jack |
| SFP+ module slots quantity | 4 |
| Installed SFP modules quantity | 0 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 24 |
| IPv4 routes | 48 |
| Number of VLANs | 4000 |
| Networking standards | IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3i, IEEE 802.3u, IEEE 802.3z |
| Virtual LAN features | Private VLAN, Protocol-based VLAN, Tagged VLAN, Voice VLAN |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| DHCP features | DHCP client, DHCP relay, DHCP server, DHCP snooping, DHCPv6 client, DHCPv6 snooping |
| Authentication | Guest VLAN, MAC-based authentication, Port-based authentication |
| Authentication type | AAA, RADIUS, TACACS+ |
| Jumbo frames | 9000 |
| Forwarding rate | 95.23 Mpps |
| MAC address table | 16000 entries |
| Packet buffer memory | 12 MB |
| Heat dissipation | 80.353 BTU/h |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 45 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Package depth | 250 mm |
| Package width | 528 mm |
| Package height | 80 mm |
| Package weight | 2690 g |
| Cables included | LAN (RJ-45) |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50/60 Hz |
| Power consumption (max) | 23.6 W |
| Harmonized System (HS) code | 85176990 |
| IPv4 & IPv6 features | IPv4/IPv6 access-control list (ACL), IPv6 Telnet, IPv6 ping, IPv6 tracert |
Weight and Dimensions| Depth | 180 mm |
|---|---|
| Width | 440 mm |
| Height | 44 mm |
Overview of TP-Link JetStream L2/L2+ Managed Switch features for workgroups and departments.
Visuals and descriptions of the front panels for various TP-Link switch models.
Explains the meaning of LED indicators for various TP-Link switch models.
Details on port types, slots, and rear panel components for different switch models.
Lists package items and crucial safety guidelines for device installation.
Lists required tools and environmental/site requirements for switch installation.
Step-by-step instructions for installing the switch on a desktop or in a rack.
Guides on physically connecting Ethernet, SFP/SFP+, and console ports to devices.
Steps to verify installation correctness and power on the switch.
Describes the switch's Power-On Self-Test and LED behavior during initialization.
Introduces configuration options and details standalone mode using GUI/CLI.
Explains central management via Omada Controllers for large networks.
Resolving forgotten passwords and abnormal PWR/Power LED indicators.
Solutions for accessing web management and fixing terminal emulation display issues.
Technical details on standards and transmission media for various switch models.
Specifications for LED indicators, operating temperature, and humidity ranges.
To Next Page