JetStream L2/L2+ Managed Switch
11Introduction
switches, the port can also provide power for PDs.
SFP/SFP+ Slot
SFP slot is designed to install the 1 Gbps SFP module. SFP+ slot is designed to install the 10 Gbps SFP+
module.
Port Feature
Model
100M/1G/2.5G/
5G/10Gbps RJ45
Port
100M/1000M/2.5Gbps
RJ45 Port
10/100/1000 Mbps
RJ45 Port
SFP+ Slot SFP Slot
Console
Port
TL-SX3206HPP 4 / / 2 / 2
TL-SX3008 F / / / 8 / 2
TL-SX3016F / / / 16 / 2
TL-SG3210 / / 8 / 2 2
TL-SG3210XHP-M2 / 8 / 2 / 2
TL-SG3428 / / 24 / 4 2
TL-SG3428M P / / 24 / 4 2
TL-SG3428X / / 24 4 / 2
TL-SG3428X- UPS / / 24 4 / 2
TL-SG3428XF / / 4* 4 24 2
TL-SG3428XMP / / 24 4 / 2
TL-SG3452 / / 48 / 4 2
TL-SG3452P / / 48 / 4 2
TL-SG3452 X / / 48 4 / 2
TL-SG3452 XP / / 48 4 / 2
*
The 4 RJ45 ports of TL-SG3428XF form combo ports with 4 SFP slots and they are not able to negotiate
with a speed of 10 Mbps.
■
Rear Panel
The rear panel of TL-SX3016F/TL-SG3428XF is shown as the following figure. The figure is for
demonstration purposes only. Your switch may differ in appearance from the depicted.
Power Socket Grounding TerminalKensington Security Slot
Note:
PWR1 is the primary power supply and it takes priority over PWR2.
The rear panel of TL-SG3428X- UPS is shown as the following figure. The figure is for demonstration
purposes only. Your switch may differ in appearance from the depicted.
Power Socket
Grounding Terminal
Kensington Security Slot
100-240V~ 50/60Hz 0.5A
12V Battery
ON
OFF
Battery switch
Battery Switch
To Next Page
Loading...
