TP-Link TL-SG3428XPP-M2 - Page 17

JetStream L2/L2+ Managed Switch
13Introduction
RJ45 console port and a micro-USB console port, console input is active on only one console port at a
time. By default, the micro-USB connector takes precedence over the RJ45 connector.
100 Mbps/1 Gbps/2.5 Gbps/5 Gbps/10 Gbps RJ45 Port
Designed to connect to the device with a bandwidth of 100 Mbps,1 Gbps, 2.5 Gbps, 5 Gbps or 10 Gbps.
For PoE switches, the port can also provide power for PDs.
10 Mbps/100 Mbps/1000 Mbps/2.5 Gbps RJ45 Port
Designed to connect to the device with a bandwidth of 10 Mbps, 100 Mbps,1000 Mbps, 2.5 Gbps. For
PoE switches, the port can also provide power for PDs.
10/100/1000 Mbps RJ45 Port
Designed to connect to the device with a bandwidth of 10 Mbps, 100 Mbps or 1000 Mbps. For PoE
switches, the port can also provide power for PDs.
SFP/SFP+ Slot
SFP slot is designed to install the 1 Gbps SFP module. SFP+ slot is designed to install the 10 Gbps SFP+
module.
Port Feature
Model
100 M/1 G/2.5 G/
5 G/10 Gbps
RJ45 Port
10 M/100 M/
1000 M/2.5 Gbps
RJ45 Port
10/100/1000 Mbps
RJ45 Port
SFP+ Slot SFP Slot Console Port
TL-SX3206HPP 4 / / 2 / 2
TL-SX3008 F / / / 8 / 2
TL-SX3016F / / / 16 / 2
TL-SG3210 / / 8 / 2 2
TL-SG3210XHP-M2 / 8* / 2 / 2
TL-SG3428 / / 24 / 4 2
TL-SG3428M P / / 24 / 4 2
TL-SG3428X / / 24 4 / 2
TL-SG3428X- UPS / / 24 4 / 2
TL-SG3428XF / / 4** 4 24 2
TL-SG3428XMP / / 24 4 / 2
TL-SG3428X- M2 / 24 / 4 / 2
TL-SG3428XPP-M2 / 24 / 4 / 2
TL-SG3452 / / 48 / 4 2
TL-SG3452P / / 48 / 4 2
TL-SG3452 X / / 48 4 / 2
TL-SG3452 XP / / 48 4 / 2
*
The RJ45 ports of TL-SG3210XHP-M2 does not support 10 Mbps rate.
**
The 4 RJ45 ports of TL-SG3428XF form combo ports with 4 SFP slots and they are not able to negotiate
with a speed of 10 Mbps.