Need help?Do you have a question about the TP-Link TL-SL1218MP and is the answer not in the manual?
General| Switch type | Unmanaged |
|---|---|
| Installed SFP modules quantity | 0 |
| Fast Ethernet (copper) ports quantity | 16 |
| Gigabit Ethernet (copper) ports quantity | 2 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 20 |
| 10G support | No |
| Auto MDI/MDI-X | Yes |
| Networking standards | IEEE 802.3af, IEEE 802.3at |
| Copper ethernet cabling technology | 10BASE-T, 100BASE-TX, 1000BASE-T |
| Jumbo frames | 10000 |
| Forwarding rate | 5.36 Mpps |
| MAC address table | 8000 entries |
| Packet buffer memory | 4.1 MB |
| Form factor | 1U |
| Certification | CE, FCC, RoHS |
| Product color | Black |
| LED indicators | LAN, PoE, Status |
| Number of fans | 2 fan(s) |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 217.22 W |
| Heat dissipation | 741.15 BTU/h |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Total Power over Ethernet (PoE) budget | 192 W |
| Power over Ethernet (PoE) power per port | 30 W |
| Package type | Box |
| Package depth | 528 mm |
| Package width | 250 mm |
| Package height | 80 mm |
| Package weight | 2960 g |
| Cables included | LAN (RJ-45) |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 180 mm |
|---|---|
| Width | 440 mm |
| Height | 44 mm |
Overview of PSE switches supporting PoE function, detailing compatibility with IEEE 802.3af/at standards.
Details the front panel layout and components of the TL-SL1218P and TL-SL1218MP models.
Lists the items included in the product package and advises on checking for damage or missing parts.
Provides essential safety guidelines to prevent device damage and bodily injury during installation and use.
Details environmental and physical requirements for the installation site, including ventilation and grounding.
Lists the necessary tools required for installation, noting they are not included with the product.
Details the procedures for installing the device, covering desktop and rack mounting methods.
Explains how to connect an Ethernet port of the switch to a computer using an RJ45 cable.
Demonstrates the process of connecting an SFP module to the SFP port of the switch.
Outlines the steps to verify the installation is correct, focusing on ventilation and grounding.
Troubleshooting steps for when the Power (PWR) LED indicator is not illuminated.
Diagnosing issues when the Link/Act LED does not light up for a connected device.
Addresses situations where PoE ports fail to supply power to connected devices due to power budget limits.
Details the IEEE standards and CSMA/CD protocol supported by the switch.
Lists the types and speeds of RJ45 and SFP ports available on different switch models.
Specifies the PoE port configuration and total power supply capacity for each switch model.
Provides information on the switch's switching capacity and MAC address table size.
Outlines the power supply requirements, fan quantity, and operating/storage environment conditions.
To Next Page