Need help?Do you have a question about the TP-Link TL-SL1218P and is the answer not in the manual?
General| Stackable | - |
|---|---|
| Form factor | 1U |
| Certification | CE, FCC, RoHS |
| Product color | Black |
| Rack mounting | Yes |
| Number of fans | 2 fan(s) |
| Housing material | Metal |
| Package depth | 528 mm |
| Package width | 250 mm |
| Package height | 80 mm |
| Package weight | 2800 g |
| Cables included | AC |
| Heat dissipation | 589.25 BTU/h |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| 10G support | No |
| Networking standards | IEEE 802.3af, IEEE 802.3at, IEEE 802.3x |
| Cable types supported | Cat3, Cat4, Cat5, Cat5e, Cat6 |
| Jumbo frames | 10000 |
| Forwarding rate | 5.36 Mpps |
| MAC address table | 8000 entries |
| Packet buffer memory | 4.1 MB |
| Total Power over Ethernet (PoE) budget | 150 W |
| Power over Ethernet (PoE) power per port | 30 W |
| Power over Ethernet plus (PoE+) ports quantity | 16 |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 172.8 W |
| Combo SFP ports quantity | 1 |
| Installed SFP modules quantity | 0 |
| Gigabit Ethernet (copper) ports quantity | 2 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 18 |
| Switch type | Unmanaged |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 180 mm |
|---|---|
| Width | 440 mm |
| Height | 44 mm |
Describes the capabilities of TP-Link PoE+ switches, including PSE and PD functions.
Details the front panel layout, LEDs, and switches of the TL-SL1218P/MP/26P models.
Lists all items included in the product package, advising to check for damage or missing parts.
Outlines essential safety rules to prevent device damage and bodily injury during installation and use.
Lists the necessary tools required for installation, noting they are not included with the product.
Provides step-by-step instructions for desktop and rack installation of the network switch.
Explains how to connect the switch to a computer using an RJ45 Ethernet cable.
Demonstrates the procedure for inserting an SFP module into the switch's SFP slot.
Lists checks to ensure the device is installed correctly, considering ventilation, power, and grounding.
Details the steps for connecting the switch to a power outlet and powering it on.
Describes the Power-On Self-Test and LED indicator behavior during the switch's startup sequence.
Steps to diagnose why the Power LED is not illuminated, checking power source and connections.
Checks to perform when the Link/Act LED does not light up, verifying cable and device status.
Explains why some PoE ports may not supply power due to overload or prioritized port usage.
Details the types and configurations of network ports (RJ45, SFP) on the switches.
Provides details on PoE ports, including port numbers and total power supply for each model.
Lists the switching capacity and MAC address table size for the devices.
Details power supply requirements, fan quantity, and operating/storage conditions.
To Next Page