To Next PageTo Next Page
Need help?Do you have a question about the TP-Link TL-SL2210WEB and is the answer not in the manual?
General| Store-and-forward | Yes |
|---|---|
| Maximum data transfer rate | 1 Gbit/s |
| Supported data transfer rates | 10/100/1000 Mbps |
| Networking standards | IEEE 802.3 |
| Switch type | Managed |
| Gigabit Ethernet (copper) ports quantity | 1 |
| Basic switching RJ-45 Ethernet ports quantity | 10 |
| Dimensions (WxDxH) | 294 x 180 x 44 mm |
| Connectivity technology | Wired |
| Dimensions (W x D x H) (imperial) | 11.6 x 7.1 x 1.7 \ |
| Stackable | - |
| Certification | FCC, CE |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
Identifies the intended readers for this user guide.
Outlines the terms and conditions regarding guide usage.
Provides a summary of the document's structure and content.
Introduces the Gigabit Web Smart Switch family and its capabilities.
Details the hardware and software features and technical specifications.
Covers installation precautions and procedures for the switch.
Describes the physical layout and components of the switch.
Covers system-wide configurations including information, file transfer, and user management.
Details configuration options for individual switch ports.
Explains network configuration, IP addressing, and MAC address management.
Provides configuration for Virtual LANs (VLANs) and their modes.
Explains Link Aggregation configuration for port grouping.
Covers Quality of Service (QoS) settings for traffic prioritization.
Describes how to configure port mirroring for network traffic monitoring.
Details the function for testing cable connectivity and diagnosing issues.
Introduces the web-based management interface.
Guides users on how to connect to the switch's web interface.
Explains the configuration of various device settings via the web interface.
