56
Gigabit Web Smart Switch User's Guide
TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB
7) The number of Port VLAN that can be set depends on the switch type.
See the Appendix C for details.
5.3.4.5 MTU VLAN Setting
This page, which is designed to congure the uplink port, displays when the
switch is in MTU VLAN mode.
Figure 5-41 MTU VLAN Setting
Notice:
1) The uplink port will buildup several VLANs with each of the other ports.
Each VLAN contains two ports, the uplink port and one of the other ports
in the switch, so the uplink port can communicate with any other port but
other ports can’t communicate with each other.
2) First time the MTU VLAN mode is set, it set port 1 to be the uplink port by
default.
5.3.5 Port Trunking
This page contains the following elds:
Figure 5-42 Port Trunking
To Next Page
Loading...
