36
Gigabit Web Smart Switch User's Guide
TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB
5.3.2 Port Setting
5.3.2.1 Port Parameter
This page contains the following elds:
Figure 5-21 Port Parameter
Port Status
¾
: Indicates whether the port is operational or non-operational.”
Enable" Indicates the port is operational and "Disable" Indicates the port
is non-operational. If a port is unused for a long time, it can be set it to be
non-operational to cut down energy costs.
Notice:
You can't manage the switch via the port, which is non-operational, please set
the value of the management port to “enable”.
Port Security
¾
: "Enable" Indicates the port will not learn new MAC address
and only transmit the frames from the MAC address it has learned.”
Disable" Indicates it will learn new MAC address.
To Next Page
Loading...
