11
Gigabit Web Smart Switch User's Guide
TL-SG2109WEB/TL-SL2210WEB/TL-SL2218WEB/TL-SL2428WEB/TL-SL2452WEB
SFP module support hot-plugging, plug the SFP module into the SFP port and
the switch can identify it automatically.
3.3 Note
The surface on which the switch is placed should be adequately secured
¾
to prevent it from becoming unstable and/or falling over.
Ensure the power source circuits are properly grounded.
¾
Ensure the power cable, extension cable, and/or plug is not damaged.
¾
Ensure the switch is not exposed to water.
¾
Ensure the switch is not exposed to radiators and/or heat sources.
¾
Do not push foreign objects into the switch, as it may cause a fire or
¾
electric shock.
Allow the switch to cool before removing covers or touching internal
¾
equipment.
Use the switch only with approved equipment. If the switch is connected to
¾
other network devices with UTP cable, ensure that the cable is not more
than 100 meters .
To Next Page
Loading...
