Chapter Introduction
Chapter 4 System This module is used to configure system properties of the switch.
Here mainly introduces:
z System Info: Configure the description, system time, Daylight
Saving Time and network parameters of the switch.
z User Management: Configure the user name and password for
users to log on to the Web management page with a certain
access level.
z System Tools: Manage the configuration file of the switch.
z Access Security: Access Security is configured to control the
users logging on to the Web management page.
Chapter 5 Switching This module is used to configure basic functions of the switch. Here
mainly introduces:
z Port: Configure the basic features for the port.
z LAG: Configure Link Aggregation Group. LAG is to combine a
number of ports together to make a single high-bandwidth data
path.
z Traffic Monitor: Monitor the traffic of each port.
z MAC Address: Configure the address table of the switch.
Chapter 6 VLAN This module is used to configure VLANs to control broadcast in
LANs. Here mainly introduces:
z 802.1Q VLAN: Configure port-based VLAN.
Chapter 7 Spanning Tree This module is used to configure spanning tree function of the
switch. Here mainly introduces:
z STP Config: Configure and view the global settings of spanning
tree function.
z Port Config: Configure CIST parameters of ports.
z MSTP Instance: Configure MSTP instances.
z STP Security: Configure protection function to prevent devices
from any malicious attack against STP features.
Chapter 8 Multicast This module is used to configure multicast function of the switch.
Here mainly introduces:
z IGMP Snooping: Configure global parameters of IGMP Snooping
function, port properties, VLAN and multicast VLAN.
z Multicast IP: Configure multicast IP table.
z Multicast Filter: Configure multicast filter feature to restrict users
ordering multicast programs.
z Packet Statistics: View the multicast data traffic on each port of
the switch, which facilitates you to monitor the IGMP messages
in the network.
3
To Next Page
Loading...
