Select: Select the desired port for Storm Control configuration. It is
multi-optional.
Port: Displays the port number of the Switch.
Broadcast Rate (bps): Enable/Disable broadcast control feature for the port.
Multicast Rate (bps): Enable/Disable multicast control feature for the port.
UL-Frame Rate (bps): Enable/Disable UL-Frame control feature for the port.
LAG: Displays the LAG number which the port belongs to.
Note:
If you enable storm control feature for the ingress rate limit-enabled port, ingress rate limit feature
will be disabled for this port.
Return to CONTENTS
101
To Next Page
