E
QUIPMENT
C
HECKLIST
3-3
Equipment Checklist
After unpacking this switch, check the contents to be sure you have
received all the components. Then, before beginning the installation, be
sure you have all other necessary installation equipment.
Package Contents
• TL-SL5428
• Four adhesive foot pads
• Bracket Mounting Kit containing two brackets and eight screws for
attaching the brackets to the switch
•Power Cord
• RS-232 console cable
• Installation and Management Guide CD
• This Installation Guide
Optional Rack-Mounting Equipment
If you plan to rack-mount the switch, be sure to have the following
equipment available:
• Four mounting screws for each device you plan to install in a
rack—these are not included
• A screwdriver (Phillips or flathead, depending on the type of screws
used)
To Next Page
Loading...
