English
1
1
Power on
Plug the extender into an electrical outlet near your
router and press the power button if it has one.
2
Connect your computer to the extender
via Wireless
Disconnect your Ethernet connection from your
computer and connect to the extender’s network (e.g.
TP-Link_Extender or TP-Link_Extender_XXX).
via Ethernet Cable
(If the extender has an Ethernet port)
Disable the Wi-Fi on your computer. Connect your
computer to the extender via an Ethernet cable.
3
Configure
1 Launch a web browser and enter
http://tplinkrepeater.net or http://192.168.0.254 in
the address bar. Create a password for future login
attempts, and click Start.
2 Follow the instructions on the web page to complete
the initial configuration.
To Next Page
Loading...
