Note:
It’s recommended to click the Export Settings button to save these settings as a txt file for your
future reference.
B. If choosing Access Point, please take the following steps to finish your quick setup.
First, there will pop up the Wireless Settings page, where you need to set the necessary wireless
parameters, such as SSID, Wireless Security, and Wireless Password. Then click Next.
Figure 3-9 Quick Setup – Wireless Settings
Finally, double-check your wireless setting and network setting; if verified, click Finish to reboot
the Device and have the previous settings take effect; if anything wrong, click Back to return the
previous pages and reconfigure it.
To Next Page
Loading...
