300Mbps Wireless N Range Extender User Guide
14
4.2 Quick Setup
Please refer to Chapter 3 Quick Installation Guide.
4.3 WPS
WPS (Wi-Fi Protected Setup) can help you to quickly and securely connect to a network. This
section will guide you to add a new wireless device to an existing network quickly by WPS function.
The WPS function can be configured on the page (shown as Figure 4-3), only when you have the
device working in Access Point mode.
Note:
The WPS unction is only available when the Operation Mode is set to Access Point; in other
words, if you select Range Extender as the Operation Mode in Figure 3-4, the WPS function is
not available. In that case, the WPS page will appear as Figure 4-2.
Figure 4-2 WPS – Disabled
To Next Page
Loading...
