English
3
FAQ (Frequently Asked Questions)
Q1 Why can't I see the login page after entering http://
tplinkrepeater.net in the browser?
A1: Make sure your computer is connected to the extender either via
the extended SSID or via an Ethernet cable (if the extender has
an Ethernet port).
A2: Make sure your computer is set to obtain an IP address
automatically.
A3: Use the IP address to access the extender. The default IP is
192.168.0.254. If the extender is connected to the router,
you should go to your router’s DHCP client list to obtain the
extender’s current IP address.
A4: Reset the extender and connect to its wireless network, enter
http://tplinkrepeater.net or 192.168.0.254 in the web browser
and press Enter.
Q2 How do I reset the extender?
A: While the extender is powered on, press the RESET button until
the LEDs turn on momentarily, then release the button.
To Next Page
Loading...
