TL-WPA4220 AV600 Powerline Wi-Fi Extender
10
Figure 3-2 Login Window
Note:
If the above screen does not prompt, it means that your web-browser has been set to a proxy. Go to
Tools > Internet Options > Connections > LAN Settings, in the screen that appears, deselect the
Using Proxy checkbox, and click OK to finish it.
3.1.2 For Wireless Connection
If your devic
e is connected to the extender via wireless, you can log in the extender by following the
steps below:
1. Launch a web-browser and type in the default domain name http://tplinkplclogin.net
in the address
field.
Figure 3-3 Log into the Powerline Extender
2. Enter admin for the User name and Password (both in lower case letters) in the screen below. Then
click OK or press Enter.
To Next Page
Loading...
