TL-WPA4220 AV600 Powerline Wi-Fi Extender
33
4.3 In Windows XP
Windows XP users may use the built-in wireless utility. Follow the steps below.
1. Click the icon
in the notification area, select the SSID of TL-WPA4220 and then click Connect.
Figure 4-8
2. Input the network key and then click Connect.
Figure 4-9
Note:
If your network is an unsecured network, you will not be prompted to input the network key.
4.4 In Windows 8 or Windows 10
If you are using Windows 8, please follow the steps below to connect to the wireless network of the
powerline extender.
To Next Page
Loading...
