TL-WR1042ND 300Mbps Wireless N Gigabit Router
Figure 4-35 FTP Server Configuration
2. Click the Enable/Disable box to enable/disable internet access to FTP from WAN port.
3. Change the Service Port to specify a port for FTP Server to use. (The default is 21, do not
change unless necessary.)
4. Click Add New Folder to add new folders for the FTP Server. The screen will show as Figure
4-36.
Figure 4-36 Add or Modify Share Folder
¾ Display Name - You can enter a display name for the share folder.
¾ Share entire partition - You can select this option and then the folders contained in
this partition will all be shared.
¾ Select - You can select this option to share the specified folder.
¾ upper - You can click the upper button to go into the upper folder.
-47-
To Next Page
Loading...
