11
Chapter 2
Connect to the Internet
4. After successfully login, select Range Extender mode and follow the Quick Setup
to set up the internet connection.
5. Relocate: Place the router between your host router and the Wi-Fi dead zone. The
location you choose must be within the range of your existing host network.
Extended NetworkHost Network
DevicesHost Router Router
6. Enjoy! The extended network shares the same SSID (network name) and password
as those of your host network.
2. 2. 4. Access Point Mode
This mode transforms your existing wired network to a wireless network.
DevicesRouterWired Router
Ethernet4Ethernet3Ethernet1Ethernet2Internet
WA N
1. Connect the power adapter to the router.
2. Connect the router to your wired host router’s Ethernet port via an Ethernet cable
as shown above.
To Next Page
Loading...
