Step 6: Log onto the Web interface of the router (192.168.1.1)
Step 7: Browse to the firmware file (Sharedband_V2.33_TP_Link_W8968.bin). Once selected,
click Update Software
Step 8: When you see the “New software is being programmed” message, wait 3 minutes.
Step 9: Reset your PC/Laptop IP settings to detect automatically, and then check the success
by logging onto the newly flashed router (http://192.168.3.17) username: admin password:
Bonding123 and click “Sharedband” and then “Configuration”
If the router displays the information, then the flash has been successful!
To Previous Page
Loading...
