TP-Link WR740N - User Manual

9/18/2015 UntitledDocument
file:///D:/Old%20Notebook/web20120511%20Go%20Daddy/html/cinet/tplink740n.htm 1/3
HowtoSetup
TPLinkWR740NRouterforWADServers


TABLEOFCONTENTS
0.Introduction
1.HowtosetuptheTPLinkWR740NRouter

0.Introduction
TPLinkWR740N(TPL740N)isahomerouterwithabuiltinDHCPserver.Itcanonlyworkasarouter,notasanaccess
point,anditisoneofthemosteconomicalrouterinthemarkettoday.Itisaeverydaystandardroutercapableofhandling100
MbpsLANconnectionand802.11nWirelesstransmission.ItisaperfectunittopairwithWAD104forhomewherethelogins
willbelimitedto5customersorless.ForWAD110andWAD120,theTPL740NcanonlybeconnectedwhentheDHCP
serverinsidetheWADunitisdisabled.NonethelessfortheWAD110orWAD120units,wheremanycustomerloginsare
expected,TPL740Nisnotrecommended.Formoredetaildescriptionoftherouter,pleaserefertoTPLinkWR740N.
ThereisnoneedtochangethedefaultconfigurationoftheTPL740NrouterforusewithWADunits.Forchangesneededin
theWAD110andWAD120units,pleaserefertotheUSERMANUALoftheWADunits.TheTPL740isalsostricklyaNON
POErouterthatcomeswithitsownpoweradapter.

1.HowtosetuptheZF7372withtheDHCPserverenabled.
ConnecttheLANcablefromtheWADunittoanyoneofthefourLANportsintheTPL740N.Besuretoavoidconnectingthe
WANport.

TP-Link WR740N Specifications

General

Wireless Standards	IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
Frequency	2.4-2.4835GHz
Button	Reset Button
Wireless Security	64/128/152-bit WEP / WPA / WPA2, WPA-PSK / WPA2-PSK
Operating Humidity	10%~90% non-condensing
Storage Humidity	5%~90% non-condensing
Ports	4 10/100Mbps LAN Ports, 1 10/100Mbps WAN Port
Antenna	1 x 5dBi Fixed Omni Directional Antenna
Power Supply	9V DC, 0.6A
Dimensions	174 x 118 x 33 mm (6.9 x 4.6 x 1.3 in.)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Signal Rate	11n: Up to 150Mbps(dynamic) 11g: Up to 54Mbps(dynamic) 11b: Up to 11Mbps(dynamic)

Summary

Introduction to TP-Link WR740 N Router

TP-Link WR740 N Router Setup Guide

Connect WAD Unit to TP-Link Router

Connect the LAN cable from the WAD unit to any LAN port on the TPL 740N, avoiding the WAN port.

Connect Internet to TP-Link Router

Connect the Internet LAN cable to the WAN port of the TPL 740N for internet access.

Auto Channel Naming Setup

Connect DECA Broadband Connector to WAD-104 and Switch for Auto Channel Naming.