EasyManuals Logo

TP-Link WA850RE User Manual

TP-Link WA850RE
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Quick Installation Guide
7106507854 REV6.0.0
Plug the extender into a power outlet next to your router.
Power On
1
Relocate and Enjoy
3
Enjoy the internet!
Extended NetworkHost Network
Network Name:
Customized/same as host network
Password:
Same as host network
Connect and Extend
2
Method 2: Via a Web Browser
1. Connect your computer or smartphone to the
extender’s network.
2. Launch a web browser, and enter
http://tplinkrepeater.net or http://192.168.0.254
in the address bar. Create a password to log in.
Note: If the login window does not appear, refer to FAQ > Q1.
http://tplinkrepeater.net
Start
Conrm Password
Create Password
TP-Link_Extender
Note:
1. The RE LED should turn solid on. If not, refer to FAQ > Q3.
2. You can customize the network name during the setup.
3. Follow the instructions to complete the setup.
Method 3: Via the Tether App
1. Download the Tether app.
3. Launch the Tether app, and select your extender.
Create a password to log in.
Scan for Tether Tether
or
2. Connect your smartphone to the extender’s
network.
TP-Link_Extender
Note:
1. The RE LED should turn solid on. If not, refer to FAQ > Q3.
2. You can customize the network name during the setup.
4. Follow the instructions to complete the setup.
Wait until the Wireless
LED turns solid on.
Method 1: Via the WPS Button
1. Press the WPS button on your router.
The extended network shares the same network
name and password as your router.
Note: If the WPS method fails, or if you want to customize the
extended network name, use Method 2 or 3.
WPS
The WPS button might
look like one of these:
2. Within 2 minutes, press the button on the
extender for 1 second.
The RE LED should
change from blinking to
solid on, indicating
successful connection.
1. Plug in the extender about halfway between your router and the Wi-Fi dead
zone. The location you choose must be within the range of your host network.
2. Wait until the LEDs are lit. Make sure 3 or more LEDs lit. If not, relocate the
extender closer to the router to achieve better signal quality.
≥ 3 LEDs lit on
Slow/Unstable
Good
Best
1
2
3
4
5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link WA850RE and is the answer not in the manual?

TP-Link WA850RE Specifications

General IconGeneral
Device TypeRange Extender
Wireless StandardsIEEE 802.11n, IEEE 802.11g, IEEE 802.11b
Frequency Band2.4GHz
Data Transfer Rate300Mbps
Antenna Type2 x Internal
ButtonRE (Range Extender) Button, Reset Button
Power ConsumptionAbout 3W
Wireless Security64/128/152-bit WEP, WPA-PSK / WPA2-PSK
Operating Temperature0°C~40°C (32°F~104°F)
Storage Temperature-40°C~70°C (-40°F~158°F)
Operating Humidity10%~90% non-condensing
Storage Humidity5%~90% non-condensing
Ethernet Port1 x 10/100 Mbps
LED IndicatorsEthernet, Signal
Dimensions110.0 x 65.8 x 75.2 mm

Related product manuals