Need help?Do you have a question about the TPI 721 and is the answer not in the manual?
Outlines important safety rules for operating the gas leak detector.
Provides comprehensive technical specifications of the device.
Guides users through the initial steps of operating the detector.
Continues the operational guide, explaining display modes.
Concludes the operational guide with leak location and alarm conditions.
Details how to customize the alarm threshold for gas detection.
General| Type | Digital Multimeter |
|---|---|
| Continuity | Yes |
| Diode Test | Yes |
| DC Voltage Range | 200mV, 2V, 20V, 200V, 600V |
| AC Voltage Range | 200V, 600V |
| DC Current Range | 200μA, 2mA, 20mA, 200mA, 10A |
| Resistance Range | 200Ω, 2kΩ, 20kΩ, 200kΩ, 2MΩ |
| Display | 3.5 Digit LCD |
To Next Page
