To Next PageTo Next Page
Need help?Do you have a question about the TPI 9070 and is the answer not in the manual?
General| Type | Combustion Analyzer |
|---|---|
| Power Supply | Rechargeable battery |
| Measures | CO, O2 |
| CO Range | 0 to 10, 000 ppm |
| O2 Range | 0 to 21% |
| Warranty | 3 years |
| Measurement Range | O2: 0-25% |
| Accuracy | +/- 5% of reading |
| Resolution | 1 ppm for CO, 0.1% for O2 |
| Display | LCD |
How to turn the meter on and its automatic shut-off function.
Instructions for replacing the two AA batteries in the device.
States the unit has no user-serviceable parts and requires return for repair.
Guidance on correctly tightening the probe tip using specific wrenches to prevent damage.
Procedures for powering on the unit and performing a vibration measurement.
Explanation of ISO value, Bearing Noise (BDU), and Total g (acceleration) readings.
How to view vibration velocity broken down into 1X, 2X, and 3X frequency bands.
How to display vibration levels as a frequency spectrum with adjustable resolution.
Guide to setting machine running speed and ISO alarm levels automatically.
Instructions for saving, loading, or viewing demo data from device memory.
Access to customize BDU thresholds, units, and device parameters.
How to adjust alarm levels for 'Worn Bearing' (Amber) and 'Bad Bearing' (Red).
Options for displaying velocity (mm/s, in/s) and run speed (Hz, RPM, CPM) units.
How to configure auto-off time, brightness, and language settings.
Guidelines for cleaning the meter, handling batteries, and preventing physical damage.
Detailed list of device dimensions, weight, environmental ratings, and performance parameters.
Record of document changes and issue dates.
