To Next PageTo Next PageWhat to do if TPI Measuring Instruments display a CO error?
If your TPI Measuring Instrument displays a CO error, this indicates a faulty CO sensor. The suggested solution is to return the instrument to the supplier for further assistance.
Why won’t my TPI Measuring Instruments turn on?
If your TPI Measuring Instrument won’t turn on, the cause may be flat batteries. Check the batteries and replace them if needed.
How to fix ‘SEnS Err’ displayed on TPI Measuring Instruments?
If ‘SEnS Err’ is displayed on your TPI Measuring Instruments screen, this indicates a faulty combustible gas sensor. The combustible gas sensor needs replacing.
General| Brand | TPI |
|---|---|
| Model | 775 |
| Category | Measuring Instruments |
| Language | English |
Details on toggling backlight and performing manual re-zero procedure.
Explanation of how combustible gas presence is indicated via LCD and LEDs.
Method for tracking/tracing combustible gas leaks using the thumb wheel.
Displays and zeroes the maximum recorded Carbon Monoxide value.
Shows the elapsed time in hours and minutes since the instrument was switched on.
Details on setting and adjusting the CO alarm warning level and its visual indication.
Information on toggling the audible alarm on/off and its visual fallback.
