34
Remote control handset
In general terms the buttons on the remote control hand-
set have the same function as the corresponding buttons
on the unit itself.
The handset also features additional buttons whose
function is explained in detail below.
Your complete 'R' system can be controlled via the
receiver using a single remote control handset.
The receiver can also pass on remote control commands
to other devices in an 'R' system via the R
LINK
system. Details of using the system with these other
units are provided in the operating instructions supplied
with them.
If you wish to operate an external source device (TAPE,
CD, TUNER, AUX etc.) the first step is to press the
corresponding button on the remote control handset.
The receiver then switches to this device as listening
source, and you can now control it.