TR-Electronic LP-46-K - Organizational measures

To Next Page

To Previous Page

Basic safety instructions

Page 12 of 26 TR - ELA - BA - GB - 0021 - 04 06/26/2018

2.6 Warranty and liability

The "General terms and conditions" (“Allgemeine Geschäftsbedingungen”) of the

company TR-Electronic GmbH apply in general. This will be available to the operator

with the contract confirmation or –conclusion at the latest. Warranty- or liability

claims with regards to personal- and property damage are excluded, if they are the

result of one or more of the following causes:

• Non-intended use of the equipment.

• Improper assembly, installation, commissioning, programming, maintenance

or dismantling of the equipment.

• Improperly executed work on the equipment by unqualified personnel.

• Operating of the equipment in the presence of technical defects.

• The performance of unauthorized mechanical or electrical modifications of the

equipment.

• The performance of unauthorized repairs

• Catastrophic incidents caused by external forces or acts of God.

2.7 Organizational measures

• The

-User manual must always be kept within reach in the equipment's

operating location.

• In addition to the

-User manual, the generally applicable legal regulations and

other mandatory directives for work safety, accident prevention and

environmental conservation are to be observed and conveyed.

• The applicable national-, site- and system-specific provisions and requirements

are to be observed and conveyed.

• The operator has the obligation to point out any special operational features and

requirements to the personnel.

• Before starting work, the personnel responsible for work on or with the equipment

must have read and understood the

-User manual, in particular the chapter on

“Basic safety instructions”.

• The nameplate and possible affixed prohibition- or instruction labels on the

equipment must be kept in a readable condition.

• Do not perform any mechanical or electrical modifications to the equipment,

except those which are specifically described in this

-User manual.

• Repairs may only be performed by the manufacturer, or by a person or body who

carries the manufacturer's authorization.