Printed in the Federal Republic of Germany TR-Electronic GmbH 2017, All Rights Reserved
06/26/2018 TR - ELA - BA - GB - 0021 - 04 Page 23 of 26
6 Equipotential bonding conductor - Connection
An equipotential is required for systems in potentially explosive areas. This is to be
done with a minimum wire diameter of 4 mm
2
.
(1): Blade terminal
(2): Blade receptacle, no scope of delivery
Figure 1: Equipotential bonding conductor - Connection
Figure 2: Dimensioned drawing – Blade terminal
To Next Page
Loading...