TrackMan iO - Page 9

INSTALLATION INSTRUCTIONS | PAGE 9IN-0050
 Usethetomarkthefourmountingholesintheonthe
  Removethefromtheandturnoffthe.
 Chooseappropriatesizeforyouranddrillfourholes.(Eg.concreteceiling)
 Insertarawplug/wallanchorineachofthedrilledholes.
 Gentlyplaceyourontoablanketortowelwiththebackofthedevicefacingup.
SIDE 9
SIDE 12
HITTING SURFACE
>305 CM / 10’0”
HITTING SCREEN
VESA 100X100 MOUNT
CEILING
DISTANCE FROM CENTER
OFF TEE MARKER
TO CENTER OF VESA
100X100 MOUNT
PREFERRED TEE MARKER
POSITION
PLUMB LINE
SIDE VIEW
HITTING SCREEN
HITTING SCREEN
HITTING SURFACE
CEILING SURFACE
TEE MARKER
IN THE CENTER OF
THE BEAM
CALIBRATION TARGET
SIDE VIEW
295CM/9’8” RECOMMENDED
TEE MARKER