EasyManuals Logo

Traeger TFB30KLF User Manual

Traeger TFB30KLF
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12
Fill the hopper with your choice of
TRAEGER
®
BRAND HARDWOOD
PELLETS. The auger tube should take
approximately 2 minutes to ll with
pellets and begin dispensing into the
repot.
WARNING! Use ONLY TRAEGER
®
BRAND HARDWOOD PELLETS. Never
use heating fuel pellets in the grill.
Continue priming until a small amount of
pellets are in direct contact with the hot
rod in the repot. Press and hold the UP
and IGNITE buttons simultaneously to
stop priming and return the grill to Idle
mode.
5 6
Recommendation: For easy cleanup, line the
grease drip tray with Traeger
®
Aluminum Drip
Tray Liners or heavy-duty aluminum foil. If using
foil, be sure the edges and ends of the foil are tight
against the bottom of the grease drip tray. Replace
foil after each cook to reduce the possibility of a
grease re. Please see “Maintaining Your Grill”
on page 22 for more details.
Now you’re ready to place the heat
bafe, grease drip tray, and porcelain-
coated grill grate back into the grill.
7 8
INITIAL FIRING INSTRUCTIONS (cont.)
Press the UP button until the temperature
display reads 450°F (250°C).
NOTE: To change between Celsius (C) and
Fahrenheit (F), press and hold the UP and
DOWN buttons simultaneously.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Traeger TFB30KLF and is the answer not in the manual?

Traeger TFB30KLF Specifications

General IconGeneral
BrandTraeger
ModelTFB30KLF
CategoryGrill
LanguageEnglish

Related product manuals