Trailer Valet 5X User Manual

Operating Manual
The most advanced trailer dolly on the planet

Trailer Valet 5X Specifications

General

Weight Capacity	5, 000 lbs
Drive System	Electric
Voltage	12V
Wheel Type	Rubber
Finish	Powder Coated
Motor Type	DC Electric
Battery Type	12V

Summary

Specifications

What's In The Box

Warnings

Overview

Part Diagram

Assembly

Installation

Step 1: Choose a Location on the Tongue

Select mounting position on trailer tongue allowing free rotation from vertical to horizontal stow.

Step 2: Install the Mounting Bracket

Attach the mounting bracket and clamps to the designated tongue area using bolts and washers.

Step 3: Secure the Trailer Valet

Attach the Trailer Valet to the mounting bracket and secure it with the stow pin.

Operating Instructions

Step 1: Secure the Trailer Valet

Mount the Trailer Valet onto the bracket and secure with the stow pin and cotter pin.

Step 2: Raise the Trailer Valet

Use the crank to raise the trailer off the hitch ball.

Step 3: Testing the Assembly

Test the assembly for stability and proper function before full operation.

Step 4: Move the Towing Vehicle

Detach the towing vehicle once the Trailer Valet supports the trailer.

Choose Your Gear

Attach Your Preferred Driver

Raise Steering Handle and Rotate Driveshaft

Re-Hitching Your Trailer

Step 1: Connect Trailer to Hitch Ball

Guide the trailer coupler over the hitch ball and lower the jack.

Step 2: Remove the Trailer Valet

Remove the drive handle and lower the jack until the Trailer Valet is above ground.

Park Your Trailer

Warranty

Maintenance