79
Tighten both nuts securely with a
17mm wrench.
80
Make sure the hole in the spindle
lines up with the castle nut.
81
Reinstall cotter pins. Bend and cut off
excess. Repeat Steps 77-81 on the
driver’s side spindle.
82
Locate outer steering joints and tight-
en the nut securely using a 12mm
socket on the nut and a 12mm wrench on the
top.
83
Locate the front passenger’s side
wheel and place it on the passenger’s
side front axle. The tread on top should point
forward with the air valve stem to the outside.
84
Locate 2 castle nuts, 2 washers and 2
cotter pins.
GOKARTMASTERS.COM
GOKARTMASTERS.COM
GOKARTMASTERS.COM GOKARTMASTERS.COM
GOKARTMASTERS.COM
GOKARTMASTERS.COM
To Next Page
Loading...
