Trainertec Electronic DT1200V - Receive Collar; Receive Collar Components and Operation

Receive Collar
NOTE: CHARGE RECEIVER BEFORE FIRST USE
On/Of f B utton
Press and hold on 4 seconds to turn the collar on. Two
confirming tones will sound and the collar green Led
light will flash 1 time per 5 seconds.
P
ress and hold on 4 seconds to turn the collar off. One
long tone will sound and the green Led light will stop
flashing and off .
Turn the
collar off when not in use to conserve battery
Contact Prong
Choose short or long prong to match
the dog’s coat type
Spanner
Change the Contact Prong basing on the pet’s
coat type .
Notes: If the Contact Prong is tight ,
Continue to turn the spanner clockwise ,
The Contact Prong will be broken . Never
turn the contact prong too tightly .
LED Light
Indicate the working status,
Low battery ,Charging status
DC Jack Cover
Open the Rubber Cover
and insert the adaptor
plug into DC Jack to
charge .
- 9 -