You may press “+” or “-“ button to select suitable
shock level, then press and hold on the “ ” button
for around 8 seconds continuous stimulation ; press one
time , emit one static shock
You may press “+” or “-“ button to select suitable
vibration level, then press and hold on the “ ”
button for around 8 seconds continuous vibrate ; press
one time , emit one vibrate .
Troubleshooting Guide
Problem#1: No stimulation when a transmitter
button is pressed.
The receiver has not been activated. The receiver must
be turned on otherwise it won’t work at all.
The receiver has not been set to your transmitter.
Follow the instruction to match.
Problem#2: The Beeper of Receiver doesn’t make
any sound when the Receiver is turned on.
Press dog selection button to choose correct Dog ID
- 17 -
To Next Page
Loading...