Ste p 6 : Press and hold “ ” button and “ ” button
at the same time again ,until the digital number
on the LCD display no change ,then
release .Exit the cancel matched receiver
mode .
Charging
The transmitter and receiver charge rapidly – about 2
hours are needed.
The transmitter and receive collar can be charged at
same time
Common adaptor for transmitter and receiver charging
To recharge, Open the Rubber Cover first . Plug the
Adaptor Contact Pin into household AC power outlet
and insert the Adaptor Plug into Receiver DC Jack .
The Transmitter and Receive Collar can be charged by
connecting USB Cable and other 5V DC power
supply ,such as Cell phone Adaptor , Notebook ,
Computer .
- 14 -
To Next Page
Loading...